Printing head silicone rubber (condensation type)
ClassifyPrinting head silicone rubber (condensation type)
Special silicone rubber for pad printing head (condensation type)
Special silicone rubber for pad printing head (condensation type)
summary
The special silicone rubber for pad printing head is a two-component condensation type silicone rubber.
It contains two components AB, A as the main agent and B as the curing agent. The two solutions can be cured at room temperature after mixing, and rapid prototyping can be achieved.
characteristic
1. Simple operation, room temperature curing.
2. High tensile strength and tear strength.
3. Good resilience.
application
Printing porcelain plates, porcelain bowls, patterns on toys, printing plastics, handicrafts, stationery.
Product parameters:
Processing program
1. Weigh the required amount of component A and place it in a 3-4 large container. Add component B in proportion according to the product parameter table, fully stir and mix, and then use it after vacuum deaeration
2. The ideal operating environment for this product is 20~25 ℃ and 50% relative humidity. High temperature and high humidity or low temperature and low humidity will affect the gelling time and curing time, so it is necessary to adjust the amount of curing agent to achieve the expected results.
storage
To ensure the good quality of this product, it should be stored in a dry environment with room humidity of 25 ℃ and in a sealed container.
Conventional packaging
Packed in 25kg drums or 200kg drums.
Copyright © 2022 Guangzhou Shisheng Chemical Co., Ltd