Silicone rubber for shoe mold
ClassifySilicone rubber for shoe mold
Special rubber for shoe mold
Special rubber for shoe mold
summary
Silicone rubber for shoe mold is a two-component condensation type silicone rubber.
It contains two components AB, A as the main agent and B as the curing agent. The two solutions can be cured at room temperature after mixing, and rapid prototyping can be achieved.
characteristic
1. Simple operation, room temperature curing.
2. Good fluidity, easy to bubble, easy to demould and easy to process.
3. Excellent heat resistance and many times of mold turnover.
4. High tensile strength and tear resistance.
application
Shoe mold.
Product parameters:
Processing program
1. Weigh the required amount of component A and place it in a 3-4 large container. Add component B in proportion according to the product parameter table, fully stir and mix, and then use it after vacuum deaeration
2. The ideal operating environment for this product is 20~25 ℃ and 50% relative humidity. High temperature and high humidity or low temperature and low humidity will affect the gelling time and curing time, so it is necessary to adjust the amount of curing agent to achieve the expected results.
storage
To ensure the good quality of this product, it should be stored in a dry environment with room humidity of 25 ℃ and in a sealed container.
Conventional packaging
Packed in 25kg drums or 200kg drums.
Copyright © 2022 Guangzhou Shisheng Chemical Co., Ltd