Hand made soap mould silicone rubber (condensation type)
ClassifyHand made soap mould silicone rubber (condensation type)
Special silicone rubber for manual soap mould (condensation type)
Special silicone rubber for manual soap mould (condensation type)
summary
Silicone rubber for hand soap mould is a two-component condensation type silicone rubber.
It contains two components AB, A as the main agent and B as the curing agent. The two solutions can be cured at room temperature after mixing, and rapid prototyping can be achieved.
characteristic
1. Good fluidity, easy to bubble, easy to demould and easy to process.
2. Simple operation and room temperature curing.
3. High tensile strength and tear resistance, and many times of mold turnover.
application
Handmade soap.
Product parameters:
Processing program
1. Weigh the required amount of component A and place it in a 3-4 large container. Add component B with weight ratio according to the product parameter table in proportion, fully stir and mix evenly, and then use it after vacuum deaeration.
2. The ideal operating environment for this product is 20~25 ℃ and 50% relative humidity. High temperature and high humidity or low temperature and low humidity will affect the gelling time and curing time, so it is necessary to adjust the amount of curing agent to achieve the expected results.
storage
To ensure the good quality of this product, it should be stored in a dry environment with room humidity of 25 ℃ and in a sealed container.
Conventional packaging
Packed in 25kg drums or 200kg drums.
Copyright © 2022 Guangzhou Shisheng Chemical Co., Ltd