Special silicone rubber for manual soap mold (addition molding)
summary
The additive silicone rubber for manual soap mould is a two-component liquid silicone rubber. After adding an appropriate amount of bridging agent, it can be fully vulcanized after baking to form a flexible elastomer. It is composed of two components AB, with a ratio of 10:1 or 1:1.
characteristic
1. It can be used for a long time and is easy to process.
2. It has high tear strength and flexibility.
3. Excellent heat resistance and wide application temperature.
4. The mold turnover accuracy is high and it is not easy to deform.
application
Handmade soap.
Product parameters：
Processing program
1. Weigh the required amount of component A and put it into a 3-4 large container. Add component B with a weight ratio of 10:1 or 1:1 according to the proportion, fully mix and mix, and then use it after vacuum deaeration.
2.25 ° C operation time is 20-40 minutes, 80% ℃~120 ℃/30-40 minutes can be vulcanized.
3. The operation time and curing time can be adjusted according to customer needs.
storage
To ensure the good quality of this product, it should be stored in a dry environment at room temperature of 25 ° C and in a sealed container. It should not be in contact with water or moisture to prevent deterioration such as increased viscosity or change of operation time.
Note that phosphorus, sulfur, amine, organic tin and other compounds may be poisoned by catalyst, which may cause the phenomenon of immature.
Conventional packaging
Packed in 25kg drums or 200kg drums.
