Silicone rubber special for prototype and coaxial engraving copper mold (spark machine) mold
summary
Silicone rubber specially used for prototype and coaxial engraving copper mold is a two-component condensation type silicone rubber.
It contains two components AB, A as the main agent and B as the curing agent. The two solutions can be cured at room temperature after mixing, and rapid prototyping can be achieved.
characteristic
1. Good fluidity, easy to bubble, easy to demould and easy to process.
2. Simple operation and room temperature curing.
3. It has high hardness and is not easy to deform.
application
Prototype mold, coaxial engraving copper mold (spark machine) mold.
Product parameters：
Processing program
1. Weigh the required amount of component A and place it in a 3-4 large container. Add component B in proportion according to the product parameter table, fully stir and mix, and then use it after vacuum deaeration
2. The ideal operating environment for this product is 20~25 ℃ and 50% relative humidity. High temperature and high humidity or low temperature and low humidity will affect the gelling time and curing time, so it is necessary to adjust the amount of curing agent to achieve the expected results.
storage
To ensure the good quality of this product, it should be stored in a dry environment with room humidity of 25 ℃ and in a sealed container.
Conventional packaging
Packed in 25kg drums or 200kg drums.
