Silicone rubber (condensation type) for PU foam, AB water and epoxy resin mold
summary
The silicone rubber for TPU foaming, AB water and epoxy resin mold is a two-component condensation type silicone rubber.
It contains two components AB, A as the main agent and B as the curing agent. The two solutions can be cured at room temperature after mixing, and rapid prototyping can be achieved.
characteristic
1. Good fluidity, easy to bubble, easy to demould and easy to process.
2. Simple operation and room temperature curing.
3. Due to the high heat output in the production process of such products, the burning resistance, tensile strength and tear resistance are particularly strengthened.
application
PU foam, AB water, epoxy resin and other products.
Product parameters：
Processing program
1. Weigh the required amount of component A into a container 3 to 4 times larger, add component B in proportion according to the product parameter table, fully stir and mix, and then use it after vacuum deaeration.
2. The ideal operating environment for this product is 20~25 ° C and 50% relative humidity. High temperature and high humidity or low temperature and low humidity will affect the gelling time and curing time, so it is necessary to adjust the amount of curing agent to achieve the expected results.
storage
To ensure the good quality of this product, it should be stored in a dry environment with room humidity of 25 ℃ and in a sealed container.
Conventional packaging
Packed in 25kg drums or 200kg drums.
